3d Printers

Rapid prototyping 3D printers 3D printing  is a form of  additive manufacturing  technology where a  three dimensional  object is created by laying down successive layers of material. 3D printers are generally faster, more affordable and easier to use than other additive manufacturing technologies. 3D printers offer product developers the ability to print parts and assemblies made of several materials with different mechanical and physical properties in a single build process. Advanced 3D printing technologies yield models that closely emulate the look, feel and functionality of product prototypes.A 3D printer works by taking a 3D computer file and using and making a series of cross-sectional slices. Each slice is then printed one on top of the other to create the 3D object. The cost of 3D printers has declined. The technology also finds use in the jewellery, footwear,  industrial design, architecture, engineering and construction (AEC), automotive, aerospace, dental and medical industries. A large number of competing technologies are available to do 3D printing. Their main differences are found in the way layers are built to create parts.Some methods use melting or softening material to produce the layers (SLS, FDM) where others lay liquid materials that are cured with different technologies. In the case of lamination systems, thin layers are cut to shape and joined together. Selective laser sintering  (SLS) Selective laser sintering  (SLS) is an additive manufacturing technique that uses a high power  laser  (for example, a  carbon dioxide laser) to fuse small particles of  plastic,  metal  (Direct Metal Laser Sintering),  ceramic, or  glass  powders into a mass that has a desired 3-dimensional shape.The laser selectively fuses powdered material by scanning cross-sections generated from a 3-D digital description of the part (for example from a  CAD  file or scan data) on the surface of a powder bed. After each cross-secti on is scanned, the powder bed is lowered by one layer thickness, a new layer of material is applied on top, and the process is repeated until the part is completed. Compared to other methods of additive manufacturing, SLS can produce parts from a relatively wide range of commercially available powder materials.These include  polymers  such as  nylon, (neat, glass-filled or with other fillers) or  polystyrene, metals including  steel,  titanium, alloy mixtures, and composites and  green sand. The physical process can be full  melting, partial melting, or liquid-phase  sintering. And, depending on the material, up to 100% density can be achieved with material properties comparable to those from conventional manufacturing methods. In many cases large numbers of parts can be packed within the powder bed, allowing very high productivity. SLS is performed by machines called SLS systems.SLS technology is in wide use around the world due to its ability to easily make very complex geometries directly from digital  CAD  data. While it began as a way to build  prototype  parts early in the design cycle, it is increasingly being used in  limited-run manufacturing  to produce end-use parts. One less expected and rapidly growing application of SLS is its use in art. [pic] The picture above is made using SLS and is a very intricate design which would be very difficult to imagine if it was only drawn on paper. Digital Light Processing (DLP)In  DLP, or Digital Light Processing, a vat of liquid polymer is exposed to light from a DLP projector under  safelight  conditions. The exposed liquid polymer hardens. The build plate then moves down in small increments and the liquid polymer is again exposed to light. The process repeats until the model is built. The liquid polymer is then drained from the vat, leaving the solid model. The  ZBuilder Ultrais an example of a DLP rapid prototyping system Laminated object manufacturing (LOM) Laminated obj ect manufacturing  (LOM) is a  rapid prototyping  system developed by Helisys Inc. Cubic Technologies is now the successor organization of Helisys) In it, layers of adhesive-coated  paper,  plastic, or  metal  laminates are successively glued together and cut to shape with a knife or  laser cutter. The process is performed as follows: 1. Sheet is adhered to a substrate with a heated roller. 2. Laser traces desired dimensions of prototype. 3. Laser cross hatches non-part area to facilitate waste removal. 4. Platform with completed layer moves down out of the way. 5. Fresh sheet of material is rolled into position. 6. Platform moves up into position to receive next layer. 7. The process is repeated.Note: †¢ Low cost due to readily availability of raw material †¢ Paper moulds have wood like characteristics, and may be worked and finished accordingly †¢ Dimensional accuracy is slightly less than that of  Stereolithography  and  Selective laser sinter ing  but no milling step is necessary. †¢ Relatively large parts may be made, because no chemical reaction is necessary. [pic] The above picture shows how intricate objects con be made by LOM. Fused deposition modelling  (FDM) Fused deposition modelling  (FDM) is an additive manufacturing technology commonly used for modelling, prototyping, and production applications.FDM works on an â€Å"additive† principle by laying down material in layers. A plastic filament or metal wire is unwound from a coil and supplies material to an  extrusion  nozzle which can turn on and off the flow. The nozzle is heated to melt the material and can be moved in both horizontal and vertical directions by a numerically controlled mechanism, directly controlled by acomputer-aided manufacturing  (CAM) software package. The model or part is produced by extruding small beads of thermoplastic material to form layers as the material hardens immediately after extrusion from the nozzle.Sev eral materials are available with different trade-offs between strength and temperature properties. As well as  acrylonitrile butadiene styrene  (ABS) polymer,  polycarbonates,  polycaprolactone,  polyphenylsulfones  and waxes, a â€Å"water-soluble† material can be used for making temporary supports while manufacturing is in progress, this soluble support material is quickly dissolved with specialized mechanical agitation equipment utilizing a precisely heated  sodium hydroxide  solution. [pic] In the picture above the support material is easy recognised and can be broken away easily.